BALLISTIC BOATS are PROUDLY WEST AUSTRALIAN DESIGNED AND BUILT
Ballistic boats came about from listening to our customers feedback and Millards sourcing and developing a hull to match the peoples wants/needs
Our experienced staff refined our initial build to now present this UNIQUE hull design, different form the usual WA builds, its sharper, its stronger, its new !
Ballistic boats are built with a CROSS LOCK hull structure to give you maximum strength under the deck, Longitudinal stringers from the hull sheet to the deck, essentially creating a box section.
Fuel tanks are centrally located and run the length of the Hull. It is located in it’s own cell eliminating any future fuel contamination in the buoyancy.
The hulls are foam filled.. The foam sits on its own mesh rack so no flotation sitting on the hull sheet of the boat to cause problems in years to come
All hulls are unpainted, FULLY WELDED and self draining to the tunnel via a rear well or alternatively it can be bilged from the same well.
5mm bottom sheets and 4mm side sheets with 130 litre underfloor fuel tank
Ballistic Boats have the S. B. S Ballast (Stabilisation Ballast System ) a tunnel located in the keel that fills with water when the boat boat is stationery.. And evacuates without drag as soon as the boat planes. Its pure purpose is to increase stability at rest.
If required the S. B. S Ballast can have the optional beach launching kit fitted and the tunnel can be easily opened or closed by the skipper using a electric actuator switch on dash
Floor is painted with a non slip paint – so no smelling carpet or moisture caused corrosion and easy to wash down
Standard with :
Dolphin T Top
Hydraulic steering
Dual batteries
VHF radio
Saltwater deck wash
Bait board
Bilge pump
Navigation lights
Solid rear ladder and transom door
Stainless seat rack with room underneath for a esky
2 x reversible chairs
Full length storage pockets
Welded rod holders
GME GPS Epirb
Offshore flares
4 x Inflatable life jackets
Sand anchor kit
Rego and stamp duty paid
These are rigged with a Suzuki 140hp 4 stroke on a Tandem Galvanised Trailer and the above standard features
Below are some optional extras
POPULAR OPTIONAL FEATURES
Beach Launch Kit $1200
Savwinch Anchor winch fitted 1000ss $ 3000
Spare wheel and bracket $ 290
SPECIFICATIONS:
Hull Length 5700mm – end of bow sprit to transom
Overall Hull Length 5900mm – end of bow sprit to end of swim platform
Overall length on trailer 7400mm
Height on trailer 3000mm with T Top
Beam 2250mm
Width on Trailer 2350mm
Internal Depth 710mm
Total weight dry 1500kg and on a 1990kg rated trailer
5mm bottom and 4mm sides and top deck
Fuel Tank Size 130L
MAX HP 140hp